The SimpliSafe® Smoke & CO Detector is compatible with a SimpliSafe® Gen 3 security system and Base Station.

85dB

The SimpliSafe Smoke & CO Detector is designed to ignore nuisance cooking smoke (ex. from burnt bacon or toast) but will still alarm in the event of smoke from a dangerous fire.

Yes, you can install yourself. The Smoke & CO Detector is wireless and is designed to be installed by yourself with minimal tools. You can find simple, step-by-step instructions in the SimpliSafe App.

The National Fire Protection Association recommends installing a smoke alarm in the following locations

• On every floor, including finished attics and basements

• Inside and outside every sleeping area

• At the top of the first-to-second stairway and on the basement ceiling near the entry of the stairs

• In homes with more than 1,000 square feet on one level, additional alarms may be required. 

If placed near/in a kitchen, SimpliSafe recommends installing at least 10 ft away from cooktops or cooking appliances.

The SimpliSafe Smoke & CO Detector offers customers 2 in 1 protection against smoke and CO that can be professionally monitored. Smoke and CO detectors work together to detect fires and the colorless, odorless and tasteless CO gas. It connects to a SimpliSafe system for whole home protection and can be monitored 24/7 by SimpliSafe professionals (with select monitoring plans).

Yes, SimpliSafe Gen 3 products with sirens are interconnected meaning that your Base Station and other sirens such as your SimpliSafe Outdoor Camera or Extra Siren will sound in unison when there’s an emergency.

Yes. If you have ceilings that are pitched, install the smoke/CO within 3 feet of the peak but not within the apex of the peak (four inches down from the peak)

The SimpliSafe Smoke & CO Detector is part of a Household Fire Warning System (when paired to the Base Station) therefore it meets most building code requirements for smoke/CO detection. Be sure to check with your local municipality for specific building code requirements in your area. The Smoke & CO Detector is designed for residential use.

Yes. The SimpliSafe Smoke & CO Detector complies with all applicable UL safety standards (UL 217 for smoke and UL 2034 for CO).